Showing posts with label Windows 7. Show all posts
Showing posts with label Windows 7. Show all posts

Javasign.dll Was Unable To Register Itself In The System Registry in Windows 7 64-bit

Friday, June 14, 2013

The Microsoft Visual Basic is an old school programming software. Starting its first release in 1991, the Microsoft Corporation had ended the production of this software in 1998 where its final release is Microsoft Visual Basic 6.0. Anyhow, this software is still widely used by the computer users especially version 6.0.

Installing Visual Basic 6.0 in the old Windows versions such as Windows 2000 or Windows XP may not or least generate the problems. However when you install it in the more recent version of Windows OS especially in 64-bit edition you will encounter some problems which most of them you need to solve it manually as the extended Microsoft support for this software had ended in 2008.

Actually there are various type of problems encounter by the users when they install the Microsoft Visual Basic 6.0 in their computer (with recent version of Windows OS installed). In this article, I would like to focus on the installation problem which related to javasign.dll.



The Problem Situation
I install the Microsoft Visual Basic 6.0 Enterprise Edition in my client’s laptop that has Windows 7 Professional 64-bit edition installed. Although the setup process encounter the problem of compatibility issue, it still run fine until the error message below pop-up at the final phase of the installation process.

javasign 

After I click OK, another error message pop-up and indicate that the program was not successfully installed. See below.

javasign2 

Note:
Actually few blogs had presented the solution to this problem. Anyhow, from my observation their solutions is more related to the Windows 7 32-bit edition. To solve this problem in Windows 7 32-bit edition, you need to copy the javacypt.dll into C:\Windows\System32 and then register the file from there using the command prompt (cmd) utility.

Anyhow, it is a little bit different when this problem occur in Windows 7 64-bit edition. You cannot simply copy the javacypt.dll file into C:\Windows\System32 folder and register it from there. Once you do, it the error message below will pop-up just after you click Enter on your keyboard.

Capture  

SO IN THIS ARTICLE I WILL SHOW YOU HOW TO SOLVE THE PROBLEM OF JAVASIGN.DLL WAS UNABLE TO REGISTER ITSELF IN THE SYSTEM REGISTRY IN WINDOWS 7 64-BIT EDITION.



What You Need

  1. You need to download the zip file that contain the javacypt.dll file from here and save it into your hard disk. To make your job easy, save the file on your desktop.

    Capture 



The Procedures

  1. In this procedure, I assume you use Windows 7 64-bit edition. If you have installed the Microsoft Visual Basic 6.0 Enterprise into your laptop, please uninstall it first. If you cannot uninstall the software using Windows Program and Features utility, you can use IObit Uninstaller

  2. Extract the zip file you download from the link in the What You Need section –> after extract, you will notice the dynamic link library file names javacypt.dll 

  3. Copy javacypt.dll file and paste it into the folder C:\Windows\SysWOW64

  4. Open the command prompt by press Capture. When the Run command box appear, type cmd and click OK. See below

    Capture

  5. Now, you will see the command prompt (cmd) utility pop-up.

    Capture

  6. Now, you are going to register the javacypt.dll file. Inside the command prompt, type the command regsvr32 C:\Windows\SysWOW64\javacypt.dll –> press Enter.

    Capture

  7. After a bit of second, the message below will pop-up. It indicate that you are succeed to register the javacypt.dll file.

    Capture

  8. Now, you can install back the Microsoft Visual Basic 6.0 software into your Windows 7 64-bit system. Don’t forget to install the Service Pack 6 for Visual Basic 6.0. Click here to download.

How To Auto Launch The Application Program At Windows 7 Logon

Monday, February 25, 2013

Human sometimes suffer from problem of forget and it cannot be denied that the forgetful nature is one of the human’s weaknesses. This problem can give negative effect in human’s daily life especially when they are at work. The problems like forget to attend meeting, forget to prepare report asked by the boss, forget to shutdown the computer is normally happen in office environment.

This problem also happen to me always. My problem is, I always forget to open the enterprise email application provide by my organization every time I turn on my office's computer. Because of this problem, I always miss the important information such as invitation to attend the faculty meeting sent by my boss to me through his email.

To solve this problem, I decide to use the built-in application provide by Windows 7 Professional. It is the Windows Task Scheduler. Using this application, I want to let the Windows 7 OS system to open my enterprise email application automatically after I log onto Windows environment.

Today, I would like to show you how to setup the Windows Task Scheduler to open the application program (eg: enterprise email) automatically after log onto Windows environment.



The Procedures

  1. Click image start Vista --> click All Programs –-> click Accessories –-> click System Tools –-> click Task Scheduler

    Capture


  2. When the Task Scheduler program launch, you will see the program interface below

    Capture


  3. Based on above, click Capture Create Task… and you will see the Create Task box like below

    Capture


  4. Click the tab General –-> write the appropriate task name –-> within the select box Configure for, choose Capture.

    Capture


  5. Now, click the tab Triggers.

    Capture


  6. Based on above, click the button Capture --> the New Trigger box will appears on your screen like below.

    Capture 


  7. Now, inside New Trigger box, choose the select box Begin the task as At log on –-> click radio button that represent Specific user and make sure your user account’s name appears –-> make sure the check box Enabled is ticked –-> click OK –-> you will see the trigger list appears in the Create Task box. See below

    Capture


  8. Now, click the tab Actions.

    Capture


  9. Based on above, click the button Capture --> the New Action box will appears on your screen like below.

    Capture


  10. Inside select box Action, choose Capture --> now, under Settings, click the button Capture --> the Open box like below will appears.

    Capture

    Navigate to the program path which you want it launch automatically at Windows log on, eg: notes.exe and then click the button Capture.


  11. Now, you will see the program path you had choose appears inside the input box that represent Program/script. See below.

    Capture


  12. Click OK and you will the action list appears in the Create Task box like below.

    Capture


  13. Now, click the tab Settings –-> make sure the check box Stop the task if it runs longer than is ticked and the select box value at the right side of it is adjusted to 12 hours –-> click OK.

    Capture


  14. Now you have finished creating the task.



After The Procedures

Restart your computer and wait until the computer finish the boot process. When you log onto the Windows environment, you will see the interface of application program which you have set to automatically launch at Windows logon appears on your computer’s screen. In this case, the Lotus Notes email application program interface’s will appears. See below

Capture

Snipping Tool For Windows 7 Starter Edition

Sunday, May 15, 2011

I think many Windows users had discovered that Windows 7 Starter Edition has a lack of screen capture ability. What I means is, it don’t have the screen capture software such as Snipping Tool.


images

 

But, recently I try to use this software which work fine with Windows XP. As a result, it work fine with Windows 7 Starter Edition too.

Install Windows 7 Using USB Thumb Drive

Wednesday, March 23, 2011

At present, many people are prefer to use a small notebook that has the size of 10 inch screen display. With its low price to buy and has the small size together with its light weight, the small notebook has become the choice to many computer users. With the features that I described, we can say that the small notebook is easy to bring anywhere.

But, one disadvantage of the small notebook is, it does not equipped with the CD/DVD ROM drive. This downside caused the users of small notebook cannot display the contents inside the CD or DVD disk. Also, the downside caused the problem to perform installation of Windows 7 using the DVD disk.

Fortunately, we can use a USB thumb drive to install Windows 7 in a small notebook. But before we can install Windows 7 into the small notebook using a USB thumb drive, we must copy all setup files for Windows 7 reside in DVD disk into the USB thumb drive.

The procedures to copy the setup files for Windows 7 into the USB thumb drive will discussed in this article. 



What You Need

  1. If you use Windows XP in your computer system, you must download and install the Diskpart program into it.

  2. The setup DVD disk of Windows 7.  

  3. The USB thumb drive. Make sure it empty  and its size can accommodate the contents of Windows 7 setup DVD disk. In general, you need 4 GB or above

  4. Your computer system. It must have CD/DVD ROM drive. 


The Procedures

  1. Attach the USB thumb drive into the USB port of your computer system.  
     
  2. Press Capture to open the Run dialog box --> type cmd in the Open: text box –-> click OK and Windows command-line interface will appears on your screen 
     
  3. On Windows command-line interface, type diskpart –-> press Capture to launch the Diskpart.exe program like a picture below:

    clip_image002

  4. Type list disk to display the current information of your hard disks. The USB thumb drive should be in the list as the Disk 1

  5. Type the words as listed below in sequence (top-down), and don’t forget to press Capture after you type each of these words

    select disk 1    clip_image001[6] Your thumb drive will be selected 
    clean    clip_image001[5] The data in your thumb drive will be deleted 
    create partition primary    clip_image001[4] The partition will be created
    active    clip_image001[3] The partition will be activated 
    format fs=ntfs quick    clip_image001[2] Setting up the NTFS file system 
    assign letter=<USB thumb drive letter>   clip_image001[1] For example is d: for the drive letter.
    exit    clip_image001 Exit diskpart.exe program

    When you finish perform this step, it means the USB thumb drive has been prepared and you are ready to perform the next steps.

  6. Minimized Windows command-line interface BUT do not close it.

  7. Insert the setup DVD disk of Windows 7 into CD/DVD ROM drive of your computer system –-> maximized back Windows command-line interface that you minimized in step 6. 

  8. On Windows command-line interface, type the words as listed below in sequence (top-down), and don’t forget to press Capture after you type each of these words

    CD/DVD ROM drive letter    clip_image001[6] E: for example. Check the CD/DVD ROM drive letter in My Computer.    
    cd boot   
    clip_image001[5] To enter the directory or folder named boot 
    bootsect.exe /nt60 <USB thumb drive letter> clip_image001[4] apply master boot record to the USB thumb drive. For the USB thumb drive letter, type d: for example. 
    exit   
    clip_image001[3] close the command-line interface

  9. Please SELECT ALL ITEMS from setup DVD disk of Windows 7 by press Capture --> copy and paste it into the USB thumb drive. 

  10. Now you are ready to install Windows 7 into a small notebook with the USB thumb drive as the replacement of Windows 7 DVD disk . 
Related Posts Plugin for WordPress, Blogger...